New & Improved Modules and Features for CADSIM Plus v2.1

• Heat Exchanger and Heat Exchanger with U Set Modules
  • Improved support for Flow and Pressure Networks (PFNs). You specify one typical flow / delta p calibration point.
• Heater / Cooler / Condensor Module
  • Improved support for Flow and Pressure Networks (PFNs)
• Pipe Module
  • Improved support for friction losses for gases and pulp slurries, user-provided surface roughness values, compressible fluid calculations and four new methods for calculating friction losses when fiber is a stream component.
• Burner Module
  • Now accepts user-defined fuels.
• Physical Properties Database
  • New property specifications for SUGAR.
• First Order Laplace Transform Module
  • Expanded math capabilities.
• Optimization Module
  • The optimization module is used to find the combination of values of independent variables that will yield a minimum value of the dependant variable.
• Matrix Times Array Module
  • Expanded math capabilities.
• Polynomial Module
  • Expanded math capabilities.
• Contact Module
  • A contact switch.
• On-line Help
  • Comprehensive drawing mode Help.
• AutoCAD (DWG) to CADSIM Plus (DRA) Conversion Utility
  • Convert AutoCAD DXF files to CADSIM Plus non-process files to use as a template for simulation.
• Convert Drawing Objects from Non-Process to Process, and Visa Versa
  • Follow up an AutoCAD conversion by bringing non-process lines into your simulation model.
• Create Custom Interfaces for DCS Emulation
  • DCS screen emulation - Live!
• Print Preview and New Printing Controls
  • Shows exact page alignment, with our without gutters, and includes consecutive pages with page breaks. Save print views for for future use.
• Improved Specification Editing
  • Visual animation and conditional specification editor improvements.
• Find and Replace
  • Text based tool that searches the drawing for keywords, etc.
• Selection and Narrow Selection Tools
  • Select exactly what you want.
• New Make Part, Cut and Copy Wizards
  • Easier visual tools that step you through the process.
• Easier Ways to Edit Smart Part Parameters and set AutoStart and AutoLoad Parameters
  • Wizards make the difference!
• Over 220 New P&ID (P&C) Drawing Parts
  • CADSIM Plus can be used to create 'living drawings'.